Filters
Buying your first skateboard
Buying your first skateboard can be a daunting process so we've put together a quick guide to help you understand the process.
There are two ways to get your first skateboard;
PRE-BUILT COMPLETES
These are skateboards that are pre-assembled and ready to roll. All you have to do is decide which width to go for and which brand/graphic you like the most. This is a good way to get a skateboard with no hassles and then decide if you then want to upgrade the parts later. As a guide boards 7.5” to 7.75” wide are good for smaller skaters, 7.8” and up are better for older skaters or people with big feet.
BUILD YOUR OWN
The way to get your dream set-up is to buy all the components separately and assemble them yourself. To do this you will need to choose a deck, trucks, wheels, bearings, bolts and griptape. The guide below will explain these components and how to choose what’s right for you.
DECK
The deck is the most important part of the board. We recommend a standard 7 ply board, in a width to suit your size [more expensive boards have carbon inserts or deck-tech but 7 ply is tried and tested]. If you are a smaller skater a board size 7.5 - 8” wide will be fine. Most fully grown skaters will ride 8.1 - 8.75” as a guide. There is no right or wrong with board size-it all depends on personal preference.
Other aspects of the board you choose will be its shape, concave and graphics. Check out the board shape image to understand these, we recommend a “popsicle” shape for your first board which can be seen below [left 4 shapes].
The concave is the slight side to side bend along the length of the board, this helps your feet stay on the board - see our graphic which explains this.Again this is all down to preference, a medium concave will be fine for your first board. The graphics [picture] are entirely down to your preference. Each brand has their own identity and you will pick a board you like the look of. Graphics have no impact on performance with a skateboard. Once you have selected your board you will then have to apply griptage - we supply Jessup grip for free with all decks but some skaters like to add graphic grip. Browse griptape.
TRUCKS
The trucks are the part of the skateboard that hold the wheels to the deck but also make it possible to turn. The trucks you choose depends on size, brand, height and colour.
An important part of the trucks are the bushings - these are the rubber parts which enable turning. Trucks will come with stock hardness bushings - normally medium. You can tighten or loosen them to your own preference. If you feel you need tighter or looser trucks you can always switch out your bushings for harder or softer ones. Browse bushings
WHEELS
Wheels come in various sizes, hardnesses and colours. We recommend a 52-54mm size in a standard hardness of around 97a-101a. You can get softer wheels which are great if you wish to use your skateboard as a mode of transport or as a cruiser. Softer wheels will roll more smoothly over rough ground. Harder wheels are better for street and parks.
BEARINGS
Bearings for skateboards come in one universal size, 608z, but have different quality ratings referred to as the ABEC. The higher the ABEC the higher precision and cost. You can also get bearings that aren’t on the ABEC scale and are ‘skate-rated’. These include our most popular bearing the BONES REDS or SWISS bearings from BONES or ENUFF. Never use your skateboard in the wet as this will compromise your bearings and your board.
TRUCK BOLTS
These attach your trucks to the board, 4 for each truck, sold in packs of 8. Allen key, Philips or hybrid [Allen and Philips]. If you use riser pads you might need a longer bolt but most boards with a standard truck will be fine with a truck bolt 7/8 - 1”.
SAFETY GEAR
We recommend a minimum of a helmet when you start out. Measure the circumference of your head to find your size. We also stock a vast range of pad sets for all different ages and sizes.